• <blockquote id="uum4w"></blockquote>
  • <code id="uum4w"><acronym id="uum4w"></acronym></code>
  • <li id="uum4w"><u id="uum4w"></u></li>
    <bdo id="uum4w"><xmp id="uum4w">
  • tiancong fastener logo

    中文 / EN

    SERVICE HOTLINE +8615533066727

    background picture
    background picture
      

    Flat washer:definition,function,basic knowledge

    2020-06-27

    1.definition

    The flat washer is mainly stamped out of iron plate, and the shape is generally a flat washer with a hole in the middle.

    2.functions

    1. Increase the contact area between the screw and the machine.

    2. Eliminate the damage to the surface of the machine when the spring pad is unloading the screw. When used, it must be a spring pad and a flat pad. The flat pad is next to the surface of the machine, and the spring pad is between the flat pad and the nut.

    3. basic knowledge

    The flat washer is mainly stamped out of iron plate, and the shape is generally a flat washer with a hole in the middle.

    The size of this hole is generally determined according to customer requirements.

    Flat washers are usually thin pieces of various shapes used to reduce friction, prevent leakage, isolate, prevent loosening, or distribute pressure. Many materials and structures have such components, which are used to perform various similar functions. Limited by the material and process of threaded fasteners, the supporting surface of bolts and other fasteners is not large, so in order to reduce the compressive stress of the pressure-bearing surface to protect the surface of the connected part, washers are used. In order to prevent the loosening of the connection pair, anti-loose spring washers, multi-tooth lock washers, round nut stop washers, and saddle, wave, and cone elastic washers are used.

    Flat washers are mainly used to reduce the pressure. When some parts are tightened with a large axial force, the washers are easy to be pressed into a dish shape. At this time, materials can be used and the hardness can be improved to solve the problem.

    The locking effect of the spring washer is general, and the important parts are used as little or not as possible, and the self-locking structure is adopted. For spring washers used for high-speed tightening (pneumatic or electric), it is best to use surface phosphated washers to improve their anti-wear performance, otherwise they will easily burn out or open due to friction and heat, or even damage the surface of the connected part. For the connection of thin plates, spring washer structure shall not be adopted. According to statistics, spring washers are used less and less in cars.

    Alibaba Store Link
    Click Open Alibaba Store
    Icaigou Store Link
    Click Open Icaigou Store
  • <blockquote id="uum4w"></blockquote>
  • <code id="uum4w"><acronym id="uum4w"></acronym></code>
  • <li id="uum4w"><u id="uum4w"></u></li>
    <bdo id="uum4w"><xmp id="uum4w">
  • 女人与公拘交酡过程_无码人妻h动漫中文字幕_一本大道东京热无码一区_小荡货腿张开水好多视频